Hi Everyone,
Ceramic decals, known in pottery as transfers, are an effective way to decorate ceramic pieces with intricate images and designs. Today, I’m going to write about the different types and processes of this technique. So, to be clear, a ceramic decal is a transfer system that is used to apply pre-printed images onto ceramic items, such as tableware, ceramic sculpture, tiles and glass containers. A decal comprises of three layers. The colour/image, the cover coat, which is like a clear glaze, and the backing paper. I have found that placing ceramic decals on white glazed pottery works really well and makes the decal image more vibrant. The process for applying the decal is first soak the decal in water, until the backing paper releases the design, then carefully slide the decal onto the ceramic surface, smoothing out any air bubbles. Next you need to allow the decal to dry and then fire it in the kiln to fix it permanently to the ceramic surface.
You can buy ready-made ceramic decals online or you can attempt to make your own and here is how…
Step 1. Design your decal. This you can do by using computer graphic software, or you can simply hand draw an image, which will be more fun and adventurous! To do this use high quality marker pens or paints that will not run when exposed to water. Draw your design directly onto decal paper (decal paper is a water-resistant paper that allows the transfer of printed designs. It is often used for making temporary tattoos and nail art. You can buy it online). If you want to, you can use regular paper first and then scan and print your design onto decal paper. If you do this make sure your printer/scanner is set to high resolution.
Step 2. If you are using an inkjet printer, spray a light, even coat of clear acrylic over your image. Let it dry and spray two more coats allowing it to dry in between.
Step 3. Cut out your design leaving a small border around the edge.
Step 4. Soak the decal in water until the backing paper starts to release (about 60 seconds.)
Step 5. Slide the decal off and onto the ceramic surface.
Step 6. Use a soft sponge to smooth out any air bubbles and get rid of any excess water.
Step 7. Let it dry thoroughly. This can take several hours. I would recommend leaving it overnight.
Step 8. Fire the ceramic piece in the kiln. Check the firing instructions with the decal paper, but it will be a low firing between 750 & 850 degrees Celsius. Allow the kiln to completely cool before removing.
Have a go, I would be very interested to see your results.
Until next time.
Barry